LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Chevy Express H1500, Van Passenger >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transmission - 4L80-E/4L85-E - Introduction & Repair Instructions) >> Repair Instructions >> Heat Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Transmission Heat Shield & Bolts
    GM765127Courtesy of GENERAL MOTORS CORP.
  1. Install the transmission heat shield to the cross member.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the two bolts securing the transmission heat shield to the cross member.

    Tighten:  Tighten the bolts to 17 N.m (13 lb ft).

  4. Lower the vehicle.