Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
- Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls - 4.3L.
- Remove the coolant reservoir bolt and set the reservoir aside.
- Remove the spark plug wires for the right side of the engine from the distributor cap.
- Remove the positive crankcase ventilation (PCV) tube from the valve rocker arm cover and the air inlet duct.
- Move the engine wiring harness aside.
- Remove the screw holding the oil fill tube to the oil fill tube lower support.
- Remove the oil fill tube from the right valve rocker arm cover and move aside.
- Remove the valve rocker arm cover bolts.
- Remove the valve rocker arm cover.