LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Chevy Express H1500, Van Passenger >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 4.3L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Tensioner Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Drive Belt Tensioner Retaining Bolt
    GM43854Courtesy of GENERAL MOTORS CORP.
  1. Install the drive belt tensioner assembly.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the attaching bolt.

    Tighten:  Tighten the tensioner assembly bolt to 50 N.m (37 lb ft).

  3. Install the drive belt. Refer to Drive Belt Replacement .
scientia non olet · About LEMON Manuals