LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Chevy Express H1500, Van Passenger >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 4.3L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Idler Pulley Replacement - without Air Conditioning >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Locating Drive Belt Idler Pulley Bolt (W/O Air Conditioning)
    GM338506Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper fan shroud. Refer to Fan Shroud Replacement - Upper in Engine Cooling.
  2. Remove the drive belt. Refer to Drive Belt Replacement .
  3. Remove the belt idler pulley bolt.
  4. Remove the belt idler pulley from the power steering pump mounting bracket.