Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Disconnect the connector (1) for the HO2S.
- Remove the HO2S (2) using aJ 39194-B .
CAUTION:
Refer to Vehicle Lifting Caution in Cautions and Notices.
NOTE:
Refer to Heated Oxygen and Oxygen Sensor Notice in Cautions and Notices.
NOTE:
Refer to Excessive Force and Oxygen Sensor Notice in Cautions and Notices.