Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Clean all the fuel pipe and hose connections and the surrounding areas before disconnecting in order to avoid contamination of the fuel system.
- Remove the fuel filler cap.
- Drain the fuel below the level of the fuel tank fill hose. Refer to Fuel Tank Draining Procedure .
- Remove the 2 retaining bolts and push-pin that retain the filler neck to the body.
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the fuel filler tube ground strap bolt.
- Loosen the fuel fill hose to fuel fill pipe clamp.
- Disconnect the fuel fill hose from the fuel fill pipe.
- Remove the fuel fill pipe assembly.