LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Chevy Express H1500, Van Passenger >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster >> Removal Procedure

Removal Procedure

    CAUTION: Refer to SIR Caution in Cautions and Notices.
    Fig 1: Instrument Cluster Trim Bezel Nuts
    GM859491Courtesy of GENERAL MOTORS CORP.
  1. Set the parking brake.
  2. Block the wheels.
  3. Remove the instrument cluster trim bezel nuts (2).
  4. Lower the steering column. Refer to Steering Column Replacement in Steering Wheel and Column.
  5. Move the shift lever to the first gear position.
  6. Pull on the instrument panel cluster (IPC) trim plate bezel (1) in order to disengage the retainers.

    Pull in the following sequence in order to disengage the retainers.

    1. Pull on the bottom.
    2. Pull at the left corner.
    3. Pull at the right corner.
    4. Pull at the top.
  7. Disconnect the electrical connectors from the switches and power ports mounted on the IPC trim plate bezel (1).
  8. Remove the IPC trim plate bezel (1) from the vehicle.
  9. Inspect the IPC trim plate bezel (1) for broken or missing retainers.

    Replace the retainers as necessary.

scientia non olet · About LEMON Manuals