Removal Procedure
- Remove the left and right windshield garnish moldings. Refer to Windshield Garnish Molding Replacement in Interior Trim.
- Remove the instrument panel (I/P) cluster trim plate bezel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster .
- Remove the screws (1, 3) from the I/P upper trim pad (2).
- Lift the I/P upper trim pad (2) on an angle and slide rearward in order to disengage the retainers at front of I/P.
- Remove the I/P upper trim pad (2) from the vehicle.
CAUTION:
Refer to SIR Caution
in Cautions and Notices.