LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Chevy Express H1500, Van Passenger >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Multifunction Alarm Module Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Multifunction Alarm Module & Electrical Connector
    GM895364Courtesy of GENERAL MOTORS CORP.
  1. Remove the drivers side knee bolster. Refer to Knee Bolster Bracket Replacement - Left .
  2. Disconnect the multi-function audio alarm module (2) electrical connector (1).
  3. Remove the multi-function audio alarm module (2) from the vehicle.
scientia non olet · About LEMON Manuals