LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Chevy Express H1500, Van Passenger >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Multifunction Alarm Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Multifunction Alarm Module & Electrical Connector
    GM895364Courtesy of GENERAL MOTORS CORP.
  1. Install the multi-function audio alarm module (2) to the mag beam.
  2. Connect the electrical connector (1) to the multi-function audio alarm module (2).
  3. Install the drivers side knee bolster. Refer to Knee Bolster Bracket Replacement - Left .
scientia non olet · About LEMON Manuals