LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Chevy Express H1500, Van Passenger >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Knee Bolster Replacement - Right >> Installation Procedure

Installation Procedure

    Fig 1: Right Knee Bolster & Bolts
    GM859483Courtesy of GENERAL MOTORS CORP.
  1. Position the I/P passenger knee bolster panel to the vehicle.
  2. Align the retainers on the I/P passenger knee bolster panel (1) with the slots at the top of the knee bolster bracket.
  3. Press on the I/P passenger knee bolster panel (1) in order to engage the retainers.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the knee bolster panel (1) bolts (2).

    Tighten:  Tighten the bolts to 3.5 N.m (31 lb in).

scientia non olet · About LEMON Manuals