Removal Procedure
- Disable the SIR. Refer to SIR Disabling and Enabling Zone 3 in SIR.
- Remove the bolts (2) from the lower edge of the instrument panel (I/P) driver knee bolster panel (1).
- Pull the I/P driver knee bolster panel (1) towards the rear of the vehicle in order to disengage the retainers.
- Remove the I/P driver knee bolster panel (1) from the vehicle.
- Inspect the I/P driver knee bolster panel (1) for broken or missing retainers.
Replace the retainers as needed.
CAUTION:
Refer to SIR Caution
in Cautions and Notices.