LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Chevy Express H1500, Van Passenger >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Knee Bolster Bracket Replacement - Right >> Installation Procedure

Installation Procedure

    Fig 1: Right Knee Bolster Bracket & Nuts
    GM859485Courtesy of GENERAL MOTORS CORP.
  1. Align the knee bolster bracket (2) to the I/P.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the nuts (1).

    Tighten:  Tighten the nuts (1) to 10 N.m (88 lb in).

  3. Install the knee bolster trim panel. Refer to Knee Bolster Replacement - Right .
  4. Install the body control module. Refer to Body Control Module Replacement in Computer/Integrating Systems.
scientia non olet · About LEMON Manuals