Removal Procedure
- Disable the SIR. Refer to SIR Disabling and Enabling Zone 5 in SIR.
- Remove the knee bolster trim panel. Refer to Knee Bolster Replacement - Right .
- Remove the instrument panel (I/P) upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
- Remove the nuts (2) retaining the I/P extension to HVAC duct.
- Remove the screws (3) from the I/P extension.
- Remove the I/P extension (1).
CAUTION:
Refer to SIR Caution
in Cautions and Notices.