LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Chevy Express H1500, Van Passenger >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel (I/P) Extension Trim Plate Replacement >> Installation Procedure

Installation Procedure

    Fig 1: I/P Extension Trim Plate, Nuts & Screws
    GM859493Courtesy of GENERAL MOTORS CORP.
  1. Install the I/P extension (1) to the I/P.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws (3).

    Tighten:  Tighten the screws (3) to 3 N.m (26 lb in).

  3. Install the nuts (2) that retain the HVAC duct to the I/P extension.

    Tighten:  Tighten the screws (2) to 3 N.m (26 lb in).

  4. Install the I/P upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper .
  5. Install the knee bolster trim panel. Refer to Knee Bolster Replacement - Right .
  6. Enable the SIR. Refer to SIR Disabling and Enabling Zone 5 in SIR.
scientia non olet · About LEMON Manuals