LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Blazer 2D Utility, 4WD, Automatic, Automatic >> Labor Times >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All1.8B
Front or Rear1.00.9B
Combination Procedure: AXLE BEARING: Replace:
Rear,Both0.8B
Rear,One Side0.6B
Combination Procedure: AXLE SEAL: Replace:
Semi-Floating Axle.
Rear,Both0.8B
Rear,One Side0.6B
Combination Procedure: BRAKE HOSE: Replace:
Each Additional0.2B
OneIncludes: Bleed Brakes.1.1B
Combination Procedure: CALIPER: Replace:
One,w/4-Wheel ABSIncludes: Bleed Brakes.1.1B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
0.5B
Combination Procedure: PARKING BRAKE SHOE & LINING: Replace:
Each Side0.2B
Combination Procedure: WHEEL BEARING: Repack:
Both Sides.
FrontNot Repackable.B