LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Transmission >> Manual Transmission Clutch System >> Repair Instructions >> Pilot Bearing Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Pressure Plate, Clutch Disc & J 35271
    GM1375552Courtesy of GENERAL MOTORS CORP.
  1. Remove the transaxle from the vehicle. Refer to Transmission Replacement in Manual Transmission - D16.
  2. Install the J 35271  (2) to the flywheel. See Special Tools .
  3. Remove the pressure plate and the clutch disc. Refer to Clutch and Pressure Plate Replacement .
    4. Fig 2: Removing Transmission Input Shaft Bearing From Crankshaft Using J 23907
    GM1375553Courtesy of GENERAL MOTORS CORP.
    CAUTION: Wear safety glasses in order to avoid eye damage.
  4. Remove the transmission input shaft bearing from the crankshaft using the J 23907  (1). See Special Tools .
scientia non olet · About LEMON Manuals