LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Transmission >> Manual Transmission Clutch System >> Repair Instructions >> Pilot Bearing Replacement >> Installation Procedure

Installation Procedure

    Fig 1: 09925-98210, J 35271 & Input Shaft Bearing
    GM1375554Courtesy of GENERAL MOTORS CORP.
  1. Install the input shaft bearing using the 09925-98210  (2) and J 35271  (1). See Special Tools .
  2. Install the pressure plate. and the clutch disc. Refer to Clutch and Pressure Plate Replacement .
  3. Remove the J 35271  (1) from the flywheel. See Special Tools .
  4. Install the transaxle to the vehicle. Refer to Transmission Replacement in Manual Transmission - D16.
scientia non olet · About LEMON Manuals