LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Transmission >> Manual Transmission Clutch System >> Repair Instructions >> Clutch Release Assembly Overhaul >> Disassembly Procedure

Disassembly Procedure

    Fig 1: Clutch Release Cylinder Assembly
    GM1251822Courtesy of GENERAL MOTORS CORP.
  1. Remove the clutch release cylinder assembly from the vehicle. Refer to Clutch Release Cylinder Assembly .
  2. Remove the bolts and brackets.
    3. Fig 2: Boot & Pushrod
    GM1251823Courtesy of GENERAL MOTORS CORP.
  3. Remove the boot and the pushrod.
    4. Fig 3: Piston Assembly
    GM1251804Courtesy of GENERAL MOTORS CORP.
  4. Compress the piston with a driver and remove the snap ring with snap ring pliers.
  5. Remove the piston assembly.
scientia non olet · About LEMON Manuals