LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Stabilizer Bar & Crossmember Assembly
    GM1241979Courtesy of GENERAL MOTORS CORP.
  1. Remove the crossmember assembly.
  2. Remove the stabilizer bar from the crossmember assembly by unscrewing the U-clamp bolts.
scientia non olet · About LEMON Manuals