LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Repair Instructions >> Power Steering Pulley Replacement (DOHC) >> Removal Procedure

Removal Procedure

    Fig 1: Air Cleaner Housing & Housing Bolts
    GM1248370Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner housing by removing the housing bolts and loosening the clamp.
    2. Fig 2: Power Steering Pump Pulley & Bolt
    GM1248371Courtesy of GENERAL MOTORS CORP.
  2. Loosen the steering pump pulley bolt.
    3. Fig 3: Pump Drive Belt & Auto-Tensioner
    GM1248373Courtesy of GENERAL MOTORS CORP.
  3. Remove the pump drive belt from the pulley by moving the auto-tensioner.
  4. Remove the steering pump pulley bolt that connect the pulley to the pump.
  5. Remove the pulley from the pump.
scientia non olet · About LEMON Manuals