LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt System >> Repair Instructions >> Seat Belt Height Adjuster Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: Upper Center Pillar Trim Panel
    GM1248401Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the seat belt height adjuster with the bolts.

    Tighten:  Tighten the seat belt height adjuster bolts to 23 N.m (17 lb ft).

  2. Install the upper center pillar trim panel. Refer to Trim Panel Replacement - Upper Center Pillar in Interior Trim.
scientia non olet · About LEMON Manuals