LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation And Air Conditioning >> Repair Instructions >> Blower Motor Resistor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Electrical Connector & Blower Motor Resistor
    GM1251909Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Disconnect the electrical connector at the resistor.
  3. Remove the retaining screws from the resistor.
  4. Remove the resistor by gently pulling it downward.
scientia non olet · About LEMON Manuals