LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation And Air Conditioning >> Diagnostic Information and Procedures >> Leak Testing >> Testing the Compressor Shaft Seal

Testing the Compressor Shaft Seal

  1. Blow shop air behind and in front of the compressor clutch/pulley for at least 15 seconds.
  2. Wait 1-2 minutes.
  3. Probe the area in front of the pulley. If the detector emits a solid alarm, there is a leak.
scientia non olet · About LEMON Manuals