Action Taken When the DTC Sets
WARNING: This page is about a different variant/trim than selected.
- The TCM will request the illumination of the hold lamp and store the DTC when the TCM detects a failure on the first ignition cycle.
- No lockup control
- No engine torque reduction control
- No engagement pressure control
- No timing solenoid control for N-D
- No self-learning control
- After failure decision: emergency mode
DTC P0758 (Non Europe or N. American Emissions)
| Normal | SS2 Fail | ||||
|---|---|---|---|---|---|
| Gear | SS1 | SS2 | Gear | SS1 | SS2 |
| 1st | ON | ON | 2nd | ON | FAIL |
| 2nd | ON | OFF | 2nd | ON | FAIL |
| 3rd | OFF | OFF | 3rd | OFF | FAIL |
| 4th | OFF | ON | 3rd | OFF | FAIL |