Oil Pump Assemble

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Oil Pump Drive Gear

Courtesy of GENERAL MOTORS CORP.

Install the oil pump drive gear and driven gear.

Fig 2: Stator Shaft & Bolts

Courtesy of GENERAL MOTORS CORP.

Align the stator shaft with each bolt hole.

NOTE: Refer to Fastener Notice .

Install the 8 bolts.
Tighten: Tighten the bolts to 9.8 N.m (87 lb in).

Fig 3: Turning Drive Gear With 2 Screwdrivers

Courtesy of GENERAL MOTORS CORP.

NOTE: Use extreme care when working around oil seals. Damage to the lip of a seal will cause oil leaks.

Turn the drive gear with 2 screwdrivers and make sure it rotates smoothly.