Counter Drive Gear Disassemble

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Tapered Roller Bearing From Transaxle Case Side Using A Puller

Courtesy of GENERAL MOTORS CORP.

Using a suitable puller, remove the tapered roller bearing from the transaxle case side.

Fig 2: Counter Driven Gear

Courtesy of GENERAL MOTORS CORP.

Using a press, remove the counter driven gear.

Fig 3: Removing Outer & Tapered Roller Bearing Race Using A Puller

Courtesy of GENERAL MOTORS CORP.

Using a suitable puller, remove the tapered roller bearing.
Using a suitable puller, remove the outer tapered roller bearing race and shim from the transaxle case.
Using a suitable puller, remove the outer tapered roller bearing race from the transaxle housing.