LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Controls And Fuel - 1.6L - Introduction (2 Of 2)) >> Repair Instructions >> Throttle Body Inspection and Cleaning

Throttle Body Inspection and Cleaning

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Wear safety glasses when using compressed air in order to prevent eye injury.
  1. Remove the throttle body from the vehicle. Refer to Throttle Body Assembly Replacement .
    2. Fig 1: View Of Throttle Body Assembly And Retaining Bolts
    GM1241931Courtesy of GENERAL MOTORS CORP.
  2. Open the throttle valve of the throttle body.
  3. Use a solvent soaked cloth to remove dirt or carbon deposits/buildup from the throttle valve and the throttle bore.
  4. Ensure that the throttle valve and throttle bore are clean and dry.
  5. Inspect that the throttle valve operates smoothly and freely.

    Install the throttle body to the vehicle. Refer to Throttle Body Assembly Replacement .

scientia non olet · About LEMON Manuals