LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Controls And Fuel - 1.6L - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission Canister Purge Solenoid Valve Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Evaporative Emission Canister Purge Solenoid Valve
    GM1920731Courtesy of GENERAL MOTORS CORP.
  1. Attach the EVAP canister purge solenoid to the intake manifold.
  2. Connect the vacuum hoses to the EVAP canister purge solenoid.
  3. Connect the EVAP canister purge solenoid connector.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals