Inspection Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Clean all parts in denatured alcohol or brake fluid.
- Use unlubricated compressed air in order to dry the parts and blow out all passages in the housing and the bleeder valve.
- Inspect the caliper bleeder valve.
- Inspect the piston and the caliper for scoring, nicks, and corrosion. Replace components if necessary.
IMPORTANT:
Do not use a hone or any other procedure to remove material from the piston or the caliper bore.