LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Hydraulic Brake System) >> Repair Instructions >> Vacuum Brake Booster Check Valve and/or Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Booster Housing Seal and Master Cylinder
    GM1245651Courtesy of GENERAL MOTORS CORP.
  1. For vehicles with a DOHC engine, remove the clip on the vacuum hose connection at the intake manifold.
  2. Pull the hose from the union nut connection. If the hose does not remove easily or is deteriorated, pry off and discard the hose.
  3. For vehicles with a SOHC engine, similarly remove the clip on the vacuum hose nut connection to the intake manifold.
  4. Pull the hose from the union nut connection. If the hose does not remove easily or is deteriorated, pry off and discard the hose.
  5. Remove the clip on the vacuum hose connection to the brake booster.
  6. Remove the vacuum hose.
scientia non olet · About LEMON Manuals