LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Hydraulic Brake System) >> Repair Instructions >> Rear Brake Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Brake Lines, Brake Hoses, and Rear Axle Brackets
    GM1242046Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle.
  2. Disconnect the brake lines from the brake hoses at the body and the rear axle brackets.
  3. Fig 2: View of Brake Hoses
    GM1242047Courtesy of GENERAL MOTORS CORP.
  4. Remove both brake hose E-ring retainers.
  5. Remove the brake hoses from the brackets.