LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Cooling System) >> Repair Instructions >> Coolant Pump Replacement (1.2L SOHC) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Coolant Pump And Mounting Bolts
    GM1223126Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice.
  1. Install the coolant pump with new gasket.
  2. Install the coolant pump mounting bolts (1) and nuts.

    Tighten:  Tighten the bolts and the nuts to 10 N.m (89 lb in).

    3. Fig 2: Rear Timing Belt Cover
    GM1223127Courtesy of GENERAL MOTORS CORP.
  3. Install the rear timing belt cover (1). Refer to Timing Belt Cover Replacement.
  4. Fill the engine cooling system. Refer to Cooling System Draining and Filling .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals