LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Cooling System) >> Repair Instructions >> Coolant Heater Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Coolant Heater And Seal
    GM785734Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
    2. IMPORTANT: A residual amount of coolant will drain from engine block.
  2. Disconnect the coolant heater power supply cord from the coolant heater.
  3. Remove the coolant heater and seal from the engine block.
scientia non olet · About LEMON Manuals