LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Engine Cooling System) >> Repair Instructions >> Coolant Heater Cord Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Coolant Heater Cord Clip And Coolant Heater
    GM1252247Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the coolant heater power supply cord from the coolant heater (2).
  2. Disconnect the coolant heater cord clip (1) from the engine lift bracket.
  3. Fig 2: View Of Coolant Reservoir And Battery
    GM1252257Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the coolant heater cord from between the washer bottle and the coolant reservoir (1).
  5. Remove the coolant heater cord from the vehicle.