LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (HVAC System - Automatic) >> Repair Instructions >> Mode Actuator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Mode Actuator
    GM1817424Courtesy of GENERAL MOTORS CORP.
  1. Install the mode door motor.
  2. Install the motor retaining screws and tighten.
  3. Install the actuating rod.
  4. Connect the electrical connector.
  5. Install the instrument panel assembly. Refer to Instrument Panel Assembly Replacement (Notchback) or Instrument Panel Assembly Replacement (Hatchback) .
  6. Connect the negative battery cable.