LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Seat Belt System) >> Repair Instructions >> Rear Seat Belt Buckle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Seat Belt Buckle
    GM1734149Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the seat belt buckle and secure with bolt.

    Tighten:  Tighten the seat belt retractor bolt to 38 N.m (28 lb ft).

  2. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .