LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Inner Belt Sealing Strip Replacement (Notchback) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Channel Molding
    GM1720604Courtesy of GENERAL MOTORS CORP.
  1. Install the channel molding onto the door trim panel.
  2. Bend the retaining tabs to secure the channel molding to the door trim panel.
  3. Install the door trim panel. Refer to Front Side Door Trim Panel Replacement (Notchback) or Front Side Door Trim Panel Replacement (Hatchback) .
scientia non olet · About LEMON Manuals