LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Seat System) >> Repair Instructions >> Head Restraint Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Head Restraint and Guide Sleeves
    GM1256657Courtesy of GENERAL MOTORS CORP.
  1. Install the guide sleeves into the seat back, making sure the angle of the guide sleeves is parallel to the seatback. Press down in order to engage the guide sleeve retaining latches.
  2. Install the head restraint into the guide sleeves. Press down in order to engage the stop pin.
scientia non olet · About LEMON Manuals