LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 64 (Lighting Systems) >> Repair Instructions >> Door Jamb Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Door Jamb Switch and Screw
    GM1248427Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. NOTE: Refer to Fastener Notice .
  3. Install the door jamb switch with the screw.

    Tighten:  Tighten the door jamb switch screw to 4.5 N.m (40 lb in).