LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Seat Back Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Rear Seat Back with Metal Loops over Hooks
    GM1248243Courtesy of GENERAL MOTORS CORP.
  1. Insert the rear seat back by inserting the metal loops over the hooks.
    2. Fig 2: View of Rear Seat Back and Bolts
    GM1248242Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the rear seat back with the bolts.

    Tighten:  Tighten the rear seat back bolt to 25 N.m (18 lb ft).

  3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .
scientia non olet · About LEMON Manuals