LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Rear Folding Seat Lock Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Rear Seat Cushion & Bolt
    GM1545481Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the rear seatback lock assembly with the screws.

    Tighten:  Tighten the rear seat back lock assembly screws to 20 N.m (15 lb ft).

  2. Install the rear seatback cover to its original position.
  3. Install the rear seatback lock release knob.
scientia non olet · About LEMON Manuals