LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Seat Hardware, Seat Trim And Upholstery) >> Repair Instructions >> Front Seat Cushion Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Seat Back
    GM1248236Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the seat cushion to the seat adjuster with the bolts.

    Tighten:  Tighten the seat cushion bolts to 25 N.m (18 lb ft).

  2. Install the seat back. Refer to Front Seat Back Replacement (Lever Type)  or Front Seat Back Replacement (Dial Type) .
scientia non olet · About LEMON Manuals