LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Interior Trim And Paneling) >> Repair Instructions >> Rear Side Door Sill Plate Replacement (Hatchback) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Screw and Rear Rocker Trim Panel
    GM1248486Courtesy of GENERAL MOTORS CORP.
  1. Install the rear rocker trim panel.
  2. Install the rear rocker trim panel with the screw.
    3. NOTE: Refer to Fastener Notice .
  3. Install the rear seatback with the bolt.

    Tighten:  Tighten the rear seatback bolt to 25 N.m (18 lb ft).

  4. Install the rear seat cushion.

    Refer to Rear Seat Cushion Replacement .

scientia non olet · About LEMON Manuals