LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Floor Coverings And HEADLININGS) >> Repair Instructions >> Floor Panel Carpet Replacement (Hatchback) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Carpet Drying
    GM1248488Courtesy of GENERAL MOTORS CORP.
  1. Remove the left and the right rear rocker trim panels.

    Refer to Rear Side Door Sill Plate Replacement (Notchback) or Rear Side Door Sill Plate Replacement (Hatchback) .

  2. Remove the rear seat back. Refer to Rear Seat Back Replacement .
  3. Remove the bolts and the left and the right lower front seat belt anchors from the lower/center pillar.
  4. Remove the left and the right lower B-pillar trim panels. Refer to Rear Side Door Sill Plate Replacement (Notchback) or Rear Side Door Sill Plate Replacement (Hatchback) .
  5. Remove the front seats. Refer to Front Seat Replacement - Bucket .
  6. Pry off the left and the right front rocker trim panels.
  7. Remove the floor console. Refer to Front Floor Console Replacement (Notchback) or Front Floor Console Replacement (Hatchback) .

  8. Remove the floor carpet.