Installation Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Rear Rocker Trim Panel and Screw

Courtesy of GENERAL MOTORS CORP.

Install the rear rocker trim panel.
Install the rear rocker trim panel with the screw.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the rear seatback with the bolt.
Tighten: Tighten the rear seatback bolt to 25 N.m (18 lb ft).
Install the rear seat cushion.
Refer to Seat Cushion Replacement - Rear .