Adjustment Procedure
WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Apply the parking brake.
- Run the engine at idle speed.
- While you move the shift lever into the reverse position, depress the clutch pedal slowly and measure the distance between the point when gear noise is not heard and the point the clutch pedal is completely depressed. The distance should be 30-35 mm (1.2-1.4 in).
- If the distance is not within the specified value, check the following:
- Clutch pedal height
- Clutch pedal play
- Air in the system
- Clutch cover and disc pressure plate