LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Pedal Replacement (Hydraulic) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Pedal Mounting Shaft, Nut & Washer
    GM1251784Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Disconnect the return spring from the clutch pedal.
  3. Remove the nut, the washer, and the pedal mounting shaft.
  4. Fig 2: Push Rod & Clutch Pedal
    GM1251785Courtesy of GENERAL MOTORS CORP.
  5. Remove the locking clip and push rod fixing pin
  6. Remove the push rod from the clutch pedal.
  7. Remove the clutch pedal.