LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Manual Steering System) >> Repair Instructions >> Outer Tie Rod Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Outer Tie Rod Hex Nut & Steering Knuckle
    GM1248347Courtesy of GENERAL MOTORS CORP.
  1. Remove the outer tie rod hex nut and disconnect the outer tie rod from the steering knuckle using the special tool KM-507-C  .
    2. Fig 2: Tie Rod Lock Nuts & Outer Tie Rod
    GM1248348Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Before loosening the tie rod lock nut, mark the position of the lock nut for easy alignment after installation procedure.
  2. Loose the tie rod lock nuts and remove the outer tie rod.
scientia non olet · About LEMON Manuals