LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Aveo Base, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Engine Mechanical - 1.6L (L91)) >> Repair Instructions >> Valve Guide Reaming/Valve and Seat Grinding >> Valve Grind

Valve Grind

WARNING: This page is about a different car, the 2004 Suzuki Swift + and 2004 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Refacing Valve
    GM1241775Courtesy of GENERAL MOTORS CORP.
  1. Ensure there are no crater line burns on the valve cone.
  2. The valve may be reground only 2 times. Do not grind the valve stem end.
  3. The angle at the valve face is 45 degrees.
  4. Inspect the assembly height of the intake valves and the exhaust valves.